AECO Sensors
Photoelectric Sensors, 10 ÷ 30 VDC, Compact Size 50 x 50 x 18 mm
| Dimensions mm | ||
| ||
| TYPE | DIRECT REFLECTION | REFLECTION WITH REFLECTOR |
| MODEL WITH CABLE | FTQ-CP |
FTQ-CR |
| MODEL WITH H PLUG | FTQ-CP H |
FTQ-CR H |
| Sensing range (Sn) (cm) | 80* | 500** |
| Programmable output | NPN/PNP NO + NC | NPN/PNP NO + NC |
| Light source (Led) | Infrared | Infrared |
| Power ON delay (mSec) | <= 80 | <= 80 |
| Switching frequency (Hz) | 700 | 700 |
| Continuous voltage (Res. ripple <=10%) | 10 ÷ 30 | 10 ÷ 30 |
| Max output current (mA) | 200 | 200 |
| Max current consumption at 24 Vdc (mA) | <=50 | <=50 |
| Voltage drop (I out = 200 mA) (V) | <=3 | <=3 |
| Short circuit protection | Incorporated | Incorporated |
| Light immunity | > 10.000 Lux | > 10.000 Lux |
| Yellow LED | Operation indicator | Operation indicator |
| Green LED | Stability control | Stability control |
| Temperature limit (°C) | Working temperature: -20 ÷ +50 / Storage temperature: -20 ÷ +65 --> --> | |
| IP rating | 65 | 65 |
| Plastic housing | Gray ABS | Gray ABS |
| Cable (2m) | 4 x 0.25 mm2 | 4 x 0.25 mm2 |
| Connector plug | H | H |
| *The sensing distance is related to matt white paper dim. 20 x 20 cm. | ||
| **The sensing distance is related to CT80 reflector. | ||
| Dimensions mm | |||
|
| |||
| TYPE | POLARIZED REFLECTION WITH REFLECTOR | THRU BEAM RECEIVER | THRU BEAM EMITTER |
| MODEL WITH CABLE | FTQ-CAR |
FTQ-CBR |
FTQ-CBE |
| MODEL WITH H PLUG | FTQ-CAR H |
FTQ-CBR H |
FTQ-CBE H |
| Sensing range (Sn) (cm) | 300** | 2000 | 2000 |
| Programmable output | NO or NC | NO or NC | - |
| Light source (Led) | Red | Infrared | Infrared |
| Power ON delay (mSec) | <= 80 | <= 80 | <= 80 |
| Switching frequency (Hz) | 700 | 250 | 250 |
| Continuous voltage (Res. ripple <=10%) | 10 ÷ 30 | 10 ÷ 30 | 10 ÷ 30 |
| Max output current (mA) | 200 | 200 | - |
| Max current consumption at 24 Vdc (mA) | <=50 | <=20 | <=50 |
| Voltage drop (I out = 200 mA) | <=3 | <=3 | - |
| Short circuit protection | Incorporated | Incorporated | - |
| Light immunity | > 10.000 Lux | > 10.000 Lux | - |
| Yellow LED | Operation indicator | Operation indicator | Power Supply (Red Led) |
| Green LED | Stability control | Stability control | Power Supply (Red Led) |
| Temperature limit (°C) | Working temperature: -20 ÷ +50 / Storage temperature: -20 ÷ +65 --> --> | ||
| IP rating | 65 | 65 | 65 |
| Plastic Housing | Gray ABS | Gray ABS | Gray ABS |
| Cable (2m) | 4 x 0.25 mm2 | 4 x 0.25 mm2 | 2 x 0.50 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 20 x 20 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
| Dimensions mm | ||
| ||
| TYPE | DIRECT REFLECTION | REFLECTION WITH REFLECTOR |
| MODEL WITH CABLE | FTQ-P-R |
FTQ-R-R |
| MODEL WITH H PLUG | FTQ-P-R-H |
FTQ-R-R-H |
| Sensing range (Sn) (cm) | 80* | 500** |
| Programmable output | RELAY ON/OFF (Programmable) | RELAY ON/OFF (Programmable) |
| Light source (Led) | Infrared | Infrared |
| Power ON delay (mSec) | <= 100 | <= 100 |
| Switching frequency (Hz) | 10 | 10 |
| Continuous voltage (Res. ripple <=10%) | 12 ÷ 240 | 12 ÷ 240 |
| Multivoltage AC/DC (V) | 12 ÷ 240 | 12 ÷ 240 |
| Max output current (mA) | Contact relay 1A 220Vac --> --> | |
| Max current consumption at 24 Vdc (mA) | 1.8 VA | 1.8 VA |
| Light immunity | > 10.000 Lux | > 10.000 Lux |
| Yellow LED | Operation indicator | Operation indicator |
| Green LED | Stability control | Stability control |
| Temperature limit (°C) | Working temperature: -20 ÷ +50 / Storage temperature: -20 ÷ +65 --> --> | |
| IP rating | 65 | 65 |
| Plastic housing | Gray ABS | Gray ABS |
| Cable (2m) | 5 x 0.35 mm2 5 x 0.35 mm2 | |
| Connector plug | H | H |
| *The sensing distance is related to matt white paper dim. 20 x 20 cm. | ||
| **The sensing distance is related to CT80 reflector. | ||
| Dimensions mm | |||
|
| |||
| TYPE | POLARIZED REFLECTION WITH REFLECTOR | THRU BEAM RECEIVER | THRU BEAM EMITTER |
| MODEL WITH CABLE | FTQ-AR-R |
FTQ-BR-R |
FTQ-BE-R |
| MODEL WITH H PLUG | FTQ-AR-R-H |
FTQ-BR-R-H |
FTQ-BE-R-H |
| Sensing range (Sn) (cm) | 300** | 2000 | 2000 |
| Programmable output | RELAY ON/OFF (Programmable) | RELAY ON/OFF (Programmable) | - |
| Light source (Led) | Red | Infrared | Infrared |
| Power ON delay (mSec) | <= 100 | <= 100 | <= 100 |
| Switching frequency (Hz) | 10 | 10 | 10 |
| Continuous voltage (Res. ripple <=10%) | 12 ÷ 240 | 12 ÷ 240 | 12 ÷ 240 |
| Multivoltage AC/DC (V) | 12 ÷ 240 | 12 ÷ 240 | 12 ÷ 240 |
| Max output current (mA) | Contact relay 1A 220Vac | Contact relay 1A 220Vac | - |
| Max current consumption at 24 Vdc (mA) | 1.8 VA | 1.8 VA | 1 VA |
| Light immunity | > 10.000 Lux | > 10.000 Lux | - |
| Yellow LED | Operation indicator | Operation indicator | Power Supply (Red Led) |
| Green LED | Stability control | Stability control | Power Supply (Red Led) |
| Temperature limit (°C) | Working temperature: -20 ÷ +50 / Storage temperature: -20 ÷ +65 --> --> | ||
| IP rating | 65 | 65 | 65 |
| Plastic Housing | Gray ABS | Gray ABS | Gray ABS |
| Cable (2m) | 5 x 0.35 mm2 | 5 x 0.35 mm2 | 2 x 0.50 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 20 x 20 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
|
| N.B.: Upon request cable for sensors with different lengths 3.5 - 5 - 7.5 - 10 metres is available. |
| VIEW OF MALE CONNECTOR, PLUG H |  |
| MODELS NPN/PNP | MODELS RELAY |
| 2 WIRES (EMITTER) | 2 WIRES (EMITTER) |
| 1 = Brown / + | 1 = Brown / ~= |
| 3 = Blue / - | 3 = Blue / ~= |
| 4 WIRES (OTHER MODELS) | 4 WIRES (OTHER MODELS) |
| 1 = Brown / + | 1 = Brown / ~= |
| 3 = Blue / - | 3 = Blue / ~= |
| 4 = Black / output NPN-PNP/N.O. | 2-4 = Relay contact |
| 2 = White / output NPN-PNP/N.C. | |
| N.B. With relay in OFF position the contact 2-4 is open. With connectors with cable the contact 2-4 corresponds to the Black-White wiring. | |
|
| Turn in the clockwise to choose the direction of the connector exit. |
| Direct reflection (P type) | Reflection with reflector (R type) |
 |
|
| Polar. reflection with reflector (AR type) | Thru beam emitter + receiver (B type) |
 |
 |
 |
|
| 1 GREEN LED - STABILITY INDICATOR: This led is on when the level of the output signal and the alignment of the photoelectric sensors are in the optimum position. In the case that the led is off this indicates that the lens is obscured or for the types with direct reflection a possible alteration of the dimension or color of the object to be detected. | |
| 2 YELLOW LED - OPERATION INDICATOR: This led is on when the object to be detected enters the sensing range of the photocell giving output signals. | |
| 3 TRIMMER FOR THE SENSING RANGE ADJUSTMENT: The photocell is supplied with max. sensing range with the trimmer totally rotated in the clockwise direction. The sensitivity reduces by rotating the trimmer in the anti-clockwise direction. | |
| 4a SWITCH NPN/PNP: The photocell is supplied with the switch in P (PNP output). To change to NPN turn the switch to N in the clockwise direction. | 4b SWITCH RELAY ON/OFF: The photocell is supplied with the switch in OFF (relay de-energized without object). To change to ON (relay energized without object) turn the switch to ON in the clockwise direction. |
| NOTE! Before giving a power supply to the photocell it is recommended that the same unit be programmed by using the switch in the required function NPN or PNP and NO or NC. | |
