AECO Sensors
Photoelectric Sensors, 20 ÷ 250 VAC
| Dimensions mm | |||
| |||
| TYPE | DIRECT REFLECTION | DIRECT REFLECTION | REFLECTION WITH REFLECTOR |
| MODEL WITH CABLE | FT18-AP2 |
FT18-AP4 |
FT18-AR |
| MODEL WITH H PLUG | FT18-AP2-H |
FT18-AP4-H |
FT18-AR-H |
| Sensing range (Sn) (cm) | 20* | 40* | 250** |
| Programmable output | NO or NC | NO or NC | NO or NC |
| Light source (Led) | Infrared | Infrared | Infrared |
| Power ON delay (mSec) | <= 75 | <= 75 | <= 75 |
| Switching frequency (Hz) | 15 | 15 | 15 |
| Continuous voltage (Res. ripple <=10%) | 20 ÷ 250 | 20 ÷ 250 | 20 ÷ 250 |
| Max output current (mA) | 300 | 300 | 300 |
| Max peak current for 20 ms (A) | 3 | 3 | 3 |
| Max current consumption at 24 Vdc (mA) | <=10 | <=10 | <=10 |
| Voltage drop (Sensor ON)(Max) (V) | 1.5 | 1.5 | 1.5 |
| Short circuit protection | Incorporated | Incorporated | Incorporated |
| Light immunity | > 10.000 Lux | > 10.000 Lux | > 10.000 Lux |
| LED | Operation indicator | Operation indicator | Operation indicator |
| Temperature limit (°C) | Storage -20 ÷ +90°C • Working -20 ÷ +50°C --> --> | ||
| IP rating | 67 | 67 | 67 |
| Plastic housing | Gray makrolon (On request stainless steel AISI 303) --> --> | ||
| Cable (2m) | 3 x 0.35 mm2 | 3 x 0.35 mm2 | 3 x 0.35 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 10 x 10 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
| Dimensions mm | |||
|
| |||
| TYPE | POLARIZED REFLECTION WITH REFLECTOR | THRU BEAM RECEIVER | THRU BEAM EMITTER |
| MODEL WITH CABLE | FT18-AAR |
FT18-ABR |
FT18-ABE |
| MODEL WITH H PLUG | FT18-AAR-H |
FT18-ABR-H |
FT18-ABE-H |
| Sensing range (Sn) (cm) | 100** | 1500 | 1500 |
| Programmable output | NO or NC | NO or NC | - |
| Light source (Led) | Red | Infrared | Infrared |
| Power ON delay (mSec) | <= 75 | <= 75 | <= 75 |
| Switching frequency (Hz) | 15 | 15 | - |
| Continuous voltage (Res. ripple <=10%) | 20 ÷ 250 | 20 ÷ 250 | 20 ÷ 250 |
| Max output current (mA) | 300 | 300 | - |
| Max peak current for 20 ms (A) | 3 | 3 | - |
| Max current consumption at 24 Vdc (mA) | <=10 | <=10 | <=10 |
| Voltage drop (I out = 200 mA) | 1.5 | 1.5 | - |
| Short circuit protection | Incorporated | Incorporated | - |
| Light immunity | > 10.000 Lux | > 10.000 Lux | - |
| Yellow LED | Operation indicator | Operation indicator | Power Supply |
| Temperature limit (°C) | Storage -20 ÷ +90°C • Working -20 ÷ +50°C --> --> | ||
| IP rating | 67 | 67 | 67 |
| Plastic Housing | Gray makrolon (On request stainless steel AISI 303) --> --> | ||
| Cable (2m) | 3 x 0.35 mm2 | 3 x 0.35 mm2 | 2 x 0.50 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 10 x 10 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
|
| N.B.: Upon request cable for sensors with different lengths 3.5 - 5 - 7.5 - 10 metres is available. |
| VIEW OF MALE CONNECTOR H | 
|
| 2 WIRINGS (EMITTER) | 4 WIRINGS |
| 1 = L1 | 1 = Brown / L1 |
| 3 = N | 3 = Blue / N |
| 4 = Black / output NO - NC | |
| N.B.: Use female connector without led. | |
| Direct reflection (P type) | Reflection with reflector (R type) |
 |
|
| Polarized reflection with reflector (AR type) | Thru beam emitter + receiver (B type) |
 |
 |
| |||
| TYPE | DIRECT REFLECTION | DIRECT REFLECTION | REFLECTION WITH REFLECTOR |
| MODEL WITH CABLE | FT18-AP2-90 |
FT18-AP4-90 |
FT18-AR-90 |
| MODEL WITH H PLUG | FT18-AP2-90-H |
FT18-AP4-90-H |
FT18-AR-90-H |
| Sensing range (Sn) (cm) | 20* | 40* | 250** |
| Programmable output | NO or NC | NO or NC | NO or NC |
| Light source (Led) | Infrared | Infrared | Infrared |
| Power ON delay (mSec) | <= 75 | <= 75 | <= 75 |
| Switching frequency (Hz) | 15 | 15 | 15 |
| Continuous voltage (Res. ripple <=10%) | 20 ÷ 250 | 20 ÷ 250 | 20 ÷ 250 |
| Max output current (mA) | 300 | 300 | 300 |
| Max peak current for 20 ms (A) | 3 | 3 | 3 |
| Max current consumption at 24 Vdc (mA) | <=10 | <=10 | <=10 |
| Voltage drop (I out = 200 mA) | 1.5 | 1.5 | 1.5 |
| Short circuit protection | Incorporated | Incorporated | Incorporated |
| Light immunity | > 10.000 Lux | > 10.000 Lux | > 10.000 Lux |
| LED | Operation indicator | Operation indicator | Operation indicator |
| Temperature limit (°C) | Storage -20 ÷ +90°C • Working -20 ÷ +50°C --> --> | ||
| IP rating | 67 | 67 | 67 |
| Plastic Housing | Gray makrolon (On request stainless steel AISI 303) --> --> | ||
| Cable (2m) | 3 x 0.35 mm2 | 3 x 0.35 mm2 | 3 x 0.35 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 10 x 10 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
| |||
| TYPE | POLARIZED REFLECTION WITH REFLECTOR | THRU BEAM RECEIVER | THRU BEAM EMITTER |
| MODEL WITH CABLE | FT18-AAR-90 |
FT18-ABR-90 |
FT18-ABE-90 |
| MODEL WITH H PLUG | FT18-AAR-90-H |
FT18-ABR-90-H |
FT18-ABE-90-H |
| Sensing range (Sn) (cm) | 100** | 1500 | 1500 |
| Programmable output | NO or NC | NO or NC | - |
| Light source (Led) | Red | Infrared | Infrared |
| Power ON delay (mSec) | <= 75 | <= 75 | <= 75 |
| Switching frequency (Hz) | 15 | 15 | 15 |
| Continuous voltage (Res. ripple <=10%) | 20 ÷ 250 | 20 ÷ 250 | 20 ÷ 250 |
| Max output current (mA) | 300 | 300 | - |
| Max peak current for 20 ms (A) | 3 | 3 | - |
| Max current consumption at 24 Vdc (mA) | <=20 | <=20 | <=35 |
| Voltage drop (I out = 200 mA) | <=3 | <=3 | - |
| Short circuit protection | Incorporated | Incorporated | - |
| Light immunity | > 10.000 Lux | > 10.000 Lux | - |
| Yellow LED | Operation indicator | Operation indicator | Power supply (Red led) |
| Green LED | Stability | Stability | Power supply (Red led) |
| Temperature limit (°C) | Storage -20 ÷ +90°C • Working -20 ÷ +50°C --> --> | ||
| IP rating | 67 | 67 | 67 |
| Plastic Housing | Gray makrolon (On request stainless steel AISI 303) --> --> | ||
| Cable (2m) | 4 x 0.25 mm2 | 4 x 0.25 mm2 | 2 x .50 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 10 x 10 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
| POWER SUPPLY LED POSITION |
|
| TYPES WITH CABLE |
|
| TYPES WITH CONNECTOR |
|
| 1 TRIMMER FOR THE SENSING RANGE ADJUSTMENT: The photocell is supplied with max. sensing range with the trimmer totally rotated in the clockwise direction. The sensitivity reduces by rotating the trimmer in the anti-clockwise direction. |
| 2 SWITCH NO/NC: The photocell is supplied with switch in NO position (in absence of the object to be detected the output is disactivated). To change to N.C. (in absence of the object to be sensed the output is actived) turn the switch to N.C. in the anti-clockwise direction. |
| 3 LED FOR INDICATION OF OPERATION: This indicates the output of the photocell, in the absence of the object to be sensed it is off with output N.O. and is on with output N.C. this changes state when the object to be sensed enters into the sensing area of the photocell. |
| NOTE! Before giving a power supply to the photocell it is recommended that the same unit be programmed by using the switch in the required function NO or NC. |
| NOTE! It is recommended that the trimmer and the switch be rotated very carefully by using a proper tool otherwise these can be seriously damaged. |
