AECO Sensors
Photoelectric Sensors, 10 ÷ 30 VDC
| Dimensions mm | 
| ||
| TYPE | DIRECT REFLECTION | DIRECT REFLECTION | REFLECTION WITH REFLECTOR |
| MODEL WITH CABLE | FT18M-CP2 |
FT18M-CP4 |
FT18M-CR |
| MODEL WITH H PLUG | FT18M-CP2-H |
FT18M-CP4-H |
FT18M-CR-H |
| Sensing range (Sn) (cm) | 20* | 40* | 250** |
| Programmable output | NPN/PNP NO + NC | NPN/PNP NO + NC | NPN/PNP NO + NC |
| Light source (Led) | Infrared | Infrared | Infrared |
| Power ON delay (mSec) | <= 75 | <= 75 | <= 75 |
| Switching frequency (Hz) | 700 | 700 | 700 |
| Continuous voltage (Res. ripple <=10%) | 10 ÷ 30 | 10 ÷ 30 | 10 ÷ 30 |
| Max output current (mA) | 200 | 200 | 200 |
| Max current consumption at 24 Vdc (mA) | <=50 | <=50 | <=20 |
| Voltage drop (I out = 200 mA) | <=3 | <=3 | <=3 |
| Short circuit protection | Incorporated | Incorporated | Incorporated |
| Light immunity | > 10.000 Lux | > 10.000 Lux | > 10.000 Lux |
| Yellow LED | Operation indicator | Operation indicator | Operation indicator |
| Green LED | Stability | Stability | Stability |
| Temperature limit (°C) | Storage -20 ÷ +90°C • Working -20 ÷ +50°C --> --> | ||
| IP rating | 67 | 67 | 67 |
| Housing | Stainless steel AISI 303 | Stainless steel AISI 303 | Stainless steel AISI 303 |
| Cable (2m) | 4 x 0.25 mm2 | 4 x 0.25 mm2 | 4 x 0.25 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 10 x 10 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
| Dimensions mm |
| ||
| TYPE | POLARIZED REFLECTION WITH REFLECTOR | THRU BEAM RECEIVER | THRU BEAM EMITTER |
| MODEL WITH CABLE | FT18M-CAR |
FT18M-CBR |
FT18M-CBE |
| MODEL WITH H PLUG | FT18M-CAR-H |
FT18M-CBR-H |
FT18M-CBE-H |
| Sensing range (Sn) (cm) | 100** | 1500 | 1500 |
| Programmable output | NPN/PNP NO + NC | NPN/PNP NO + NC | - |
| Light source (Led) | Red | Infrared | Infrared |
| Power ON delay (mSec) | <= 75 | <= 75 | <= 75 |
| Switching frequency (Hz) | 700 | 250 | 250 |
| Continuous voltage (Res. ripple <=10%) | 10 ÷ 30 | 10 ÷ 30 | 10 ÷ 30 |
| Max output current (mA) | 200 | 200 | - |
| Max current consumption at 24 Vdc (mA) | <=20 | <=20 | <=35 |
| Voltage drop (I out = 200 mA) | <=3 | <=3 | - |
| Short circuit protection | Incorporated | Incorporated | - |
| Light immunity | > 10.000 Lux | > 10.000 Lux | - |
| Yellow LED | Operation indicator | Operation indicator | Power Supply (Red led) |
| Green LED | Stability | Stability | Power Supply (Red led) |
| Temperature limit (°C) | Storage -20 ÷ +90°C • Working -20 ÷ +50°C --> --> | ||
| IP rating | 67 | 67 | 67 |
| Housing | Stainless steel AISI 303 | Stainless steel AISI 303 | Stainless steel AISI 303 |
| Cable (2m) | 4 x 0.25 mm2 | 2 x 0.50 mm2 | 4 x .25 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 10 x 10 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
|
| N.B.: Upon request cable for sensors with different lengths 3.5 - 5 - 7.5 - 10 metres is available. |
| VIEW OF MALE CONNECTOR H | 
|
| 2 WIRINGS (EMITTER) | 4 WIRINGS |
| 1 = Brown / + | 1 = Brown / +< |
| 3 = Blue / -- | 3 = Blue / -- |
| 4 = Black / output NO | |
| 2 = White / output NC | |
| Direct reflection (P type) | Reflection with reflector (R type) |
 |
|
| Polarized reflection (AR type) | Thru beam emitter + receiver (B type) |
 |
 |
| |||
| TYPE | DIRECT REFLECTION | DIRECT REFLECTION | REFLECTION WITH REFLECTOR |
| MODEL WITH CABLE | FT18M-CP2-90 |
FT18M-CP4-90 |
FT18M-CR-90 |
| MODEL WITH H PLUG | FT18M-CP2-90 H |
FT18M-CP4-90 H |
FT18M-CR-90 H |
| Sensing range (Sn) (cm) | 20* | 40* | 250** |
| Programmable output | NPN/PNP NO + NC | NPN/PNP NO + NC | NPN/PNP NO + NC |
| Light source (Led) | Infrared | Infrared | Infrared |
| Power ON delay (mSec) | <= 75 | <= 75 | <= 75 |
| Switching frequency (Hz) | 700 | 700 | 700 |
| Continuous voltage (Res. ripple <=10%) | 10 ÷ 30 | 10 ÷ 30 | 10 ÷ 30 |
| Max output current (mA) | 200 | 200 | 200 |
| Max current consumption at 24 Vdc (mA) | <=50 | <=50 | <=20 |
| Voltage drop (I out = 200 mA) | <=3 | <=3 | <=3 |
| Short circuit protection | Incorporated | Incorporated | Incorporated |
| Light immunity | > 10.000 Lux | > 10.000 Lux | > 10.000 Lux |
| Yellow LED | Operation indicator | Operation indicator | Operation indicator |
| Green LED | Stability | Stability | Stability |
| Temperature limit (°C) | Storage -20 ÷ +90°C • Working -20 ÷ +50°C --> --> | ||
| IP rating | 67 | 67 | 67 |
| Housing | Stainless steel AISI 303 | Stainless steel AISI 303 | Stainless steel AISI 303 |
| Cable (2m) | 4 x 0.25 mm2 | 4 x 0.25 mm2 | 4 x .25 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 10 x 10 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
|
| |||
| TYPE | POLARIZED REFLECTION WITH REFLECTOR | THRU BEAM RECEIVER | THRU BEAM EMITTER |
| MODEL WITH CABLE | FT18M-CAR-90 |
FT18M-CBR-90 |
FT18M-CBE-90 |
| MODEL WITH H PLUG | FT18M-CAR-90 H |
FT18M-CBR-90 H |
FT18M-CBE-90 H |
| Sensing range (Sn) (cm) | 100** | 1500 | 1500 |
| Programmable output | NPN/PNP NO + NC | NPN/PNP NO + NC | - |
| Light source (Led) | Red | Infrared | Infrared |
| Power ON delay (mSec) | <= 75 | <= 75 | <= 75 |
| Switching frequency (Hz) | 700 | 250 | 250 |
| Continuous voltage (Res. ripple <=10%) | 10 ÷ 30 | 10 ÷ 30 | 10 ÷ 30 |
| Max output current (mA) | 200 | 200 | - |
| Max current consumption at 24 Vdc (mA) | <=20 | <=20 | <=35 |
| Voltage drop (I out = 200 mA) | <=3 | <=3 | - |
| Short circuit protection | Incorporated | Incorporated | - |
| Light immunity | > 10.000 Lux | > 10.000 Lux | - |
| Yellow LED | Operation indicator | Operation indicator | Power supply (Red led) |
| Green LED | Stability | Stability | Power supply (Red led) |
| Temperature limit (°C) | Storage -20 ÷ +90°C • Working -20 ÷ +50°C --> --> | ||
| IP rating | 67 | 67 | 67 |
| Housing | Stainless steel AISI 303 | Stainless steel AISI 303 | Stainless steel AISI 303 |
| Cable (2m) | 4 x 0.25 mm2 | 4 x 0.25 mm2 | 2 x .50 mm2 |
| Connector plug | H | H | H |
| *The sensing distance is related to matt white paper dim. 10 x 10 cm. | |||
| **The sensing distance is related to CT80 reflector. | |||
| POWER SUPPLY LED POSITION |
|
| TYPES WITH CABLE |
|
| TYPES WITH CONNECTOR |
|
| 1 TRIMMER FOR THE SENSING RANGE ADJUSTMENT: The photocell is supplied with max. sensing range with the trimmer totally rotated in the clockwise direction. The sensitivity reduces by rotating the trimmer in the anti-clockwise direction. |
| 2 SWITCH NPN/PNP: The photocell is supplied with the switch in P (PNP output). To change to NPN turn the switch to N in the anti-clockwise direction. WARNING! For a correct working of the unit, do not carry out the switching when the photocell is powered. |
| 3 GREEN LED - STABILITY INDICATOR: This led is on when the level of the output signal and the alignment of the photoelectric sensors are in the optimum position. In the case that the led is off this indicates that the lens is obscured or for the types with direct reflection a possible alteration of the dimension or color of the object to be detected. |
| 4 YELLOW LED - OPERATION INDICATOR: This led is on when the object to be detected enters the sensing range of the photocell giving output signals. |
| NOTE! Before giving a power supply to the photocell it is recommended that the same unit be programmed by using the switch in the required function NPN or PNP. |
| NOTE! It is recommended that the trimmer and the switch be rotated very carefully by using a proper tool otherwise these can be seriously damaged. |
