AECO Sensors
Inductive Sensors M30 x 1.5
| EMBEDDABLE (FLUSH MOUNTING) | ||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | ||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
|
| ST | ST | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI30 - C10 NPN NO S |
SI30 - C10 NPN NO H S |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI30 - C10 NPN NC S |
SI30 - C10 NPN NC H S |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI30 - C10 PNP NO S |
SI30 - C10 PNP NO H S |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI30 - C10 PNP NC S |
SI30 - C10 PNP NC H S |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | ||
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | ||
| Switching distance (Sn) (mm) | 10 | 10 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | |
| Hysteresis (%Sn) (mm) | < 10% ---> | |
| Switching frequency (Hz) | 300 ---> | |
| Repeatability (% of Sn) | <= 3 ---> | |
| Max output current (mA) | 200 ---> | |
| Absorption at 24Vdc (mA) | < 15 ---> | |
| Voltage drop (sensor ON) (V) | < 1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits (°C) | - 25 ÷ + 70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Nickelled brass ---> | |
| Cable PVC (2m) | 3 x 0.35 mm^2 | |
| Connector plug | H | |
| EMBEDDABLE (FLUSH MOUNTING) | ||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | ||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
|
| EX | EX | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI30 - DC15 NPN NO S | SI30 - DC15 NPN NO H S |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI30 - DC15 NPN NC S | SI30 - DC15 NPN NC H S |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI30 - DC15 PNP NO S | SI30 - DC15 PNP NO H S |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI30 - DC15 PNP NC S | SI30 - DC15 PNP NC H S |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | SI30 - DC15 NPN NO + NC S | SI30 - DC15 NPN NO + NC H S |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | SI30 - DC15 PNP NO + NC S | SI30 - DC15 PNP NO + NC H S |
| Switching distance (Sn) (mm) | 15 | 15 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | |
| Hysteresis (%Sn) (mm) | < 10% ---> | |
| Switching frequency (Hz) | 300 ---> | |
| Repeatability (% of Sn) | <= 3 ---> | |
| Max output current (mA) | 200 ---> | |
| Absorption at 24Vdc (mA) | < 15 ---> | |
| Voltage drop (sensor ON) (V) | < 1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits (°C) | - 25 ÷ + 70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Nickelled brass ---> | |
| Cable PVC (2m) | 3 x 0.35 mm^2 - 4 x 0.25 mm^2 | |
| Connector plug | H | |
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | ||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | ||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
|
| EX | EX | |
| AMPLIFIED 3 WIRES D.C. NPN NO | ||
| AMPLIFIED 3 WIRES D.C. NPN NC | ||
| AMPLIFIED 3 WIRES D.C. PNP NO | ||
| AMPLIFIED 3 WIRES D.C. PNP NC | ||
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | SI30 - DCE20 NPN NO + NC S | SI30 - DCE20 NPN NO + NC H S |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | SI30 - DCE20 PNP NO + NC S | SI30 - DCE20 PNP NO + NC H S |
| Switching distance (Sn) (mm) | 20 | 20 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | |
| Hysteresis (%Sn) (mm) | < 10% ---> | |
| Switching frequency (Hz) | 200 ---> | |
| Repeatability (% of Sn) | <= 3 ---> | |
| Max output current (mA) | 200 ---> | |
| Absorption at 24Vdc (mA) | < 15 ---> | |
| Voltage drop (sensor ON) (V) | < 1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits (°C) | - 25 ÷ + 70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Nickelled brass ---> | |
| Cable PVC (2m) | 4 x 0.25 mm^2 | |
| Connector plug | H | |
| EMBEDDABLE (FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI30 - C10 NPN NO |
SI30 - C10 NPN NO H |
SI30 - C10 NPN NO K |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI30 - C10 NPN NC |
SI30 - C10 NPN NC H |
SI30 - C10 NPN NC K |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI30 - C10 PNP NO |
SI30 - C10 PNP NO H |
SI30 - C10 PNP NO K |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI30 - C10 PNP NC |
SI30 - C10 PNP NC H |
SI30 - C10 PNP NC K |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | SI30 - C10 NPN NO + NC |
SI30 - C10 NPN NO + NC H |
SI30 - C10 NPN NO + NC K |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | SI30 - C10 PNP NO + NC |
SI30 - C10 PNP NO + NC H |
SI30 - C10 PNP NO + NC K |
| Switching distance (Sn) (mm) | 10 | 10 | 10 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 300 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 200 ---> | ||
| Absorption at 24Vdc (mA) | < 15 ---> | ||
| Voltage drop (sensor ON) (V) | < 1.8 ---> | ||
| Short circuit protection | Incorporated ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 3 x 0.35 mm^2 - 4 x 0.25 mm^2 | ||
| Connector plug | H | K (type 11) | |
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI30 - CE15 NPN NO |
SI30 - CE15 NPN NO H |
SI30 - CE15 NPN NO K |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI30 - CE15 NPN NC |
SI30 - CE15 NPN NC H |
SI30 - CE15 NPN NC K |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI30 - CE15 PNP NO | SI30 - CE15 PNP NO H | SI30 - CE15 PNP NO K |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI30 - CE15 PNP NC |
SI30 - CE15 PNP NC H |
SI30 - CE15 PNP NC K |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | SI30 - CE15 NPN NO + NC |
SI30 - CE15 NPN NO + NC H |
SI30 - CE15 NPN NO + NC K |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | SI30 - CE15 PNP NO + NC | SI30 - CE15 PNP NO + NC H | SI30 - CE15 PNP NO + NC K |
| Switching distance (Sn) (mm) | 15 | 15 | 15 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 300 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 200 ---> | ||
| Absorption at 24Vdc (mA) | < 15 ---> | ||
| Voltage drop (sensor ON) (V) | < 1.8 ---> | ||
| Short circuit protection | Incorporated ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 3 x 0.35 mm^2 - 4 x 0.25 mm^2 | ||
| Connector plug | H | K (type 11) | |
| EMBEDDABLE (FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 2 WIRES D.C. NO | SI30 - B10 NO |
SI30 - B10 NO H |
SI30 - B10 NO K |
| AMPLIFIED 2 WIRES D.C. NC | SI30 - B10 NC |
SI30 - B10 NC H |
SI30 - B10 NC K |
| Switching distance (Sn) (mm) | 10 | 10 | 10 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 55 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 300 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 100 ---> | ||
| Min. output current (mA) | 1.5 ---> | ||
| Absorption at 24Vdc (mA) | < 0.6 ---> | ||
| Voltage drop (sensor ON) (V) | < 6.5 ---> | ||
| Short circuit protection | Incorporated ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 2 x 0.50 mm^2 | ||
| Connector plug | H | K (type 11) | |
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 2 WIRES D.C. NO | SI30 - BE15 NO |
SI30 - BE15 NO H |
SI30 - BE15 NO K |
| AMPLIFIED 2 WIRES D.C. NC | SI30 - BE15 NC |
SI30 - BE15 NC H |
SI30 - BE15 NC K |
| Switching distance (Sn) (mm) | 15 | 15 | 15 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 55 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 300 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 100 ---> | ||
| Min. output current (mA) | 1.5 ---> | ||
| Absorption at 24Vdc (mA) | < 0.6 ---> | ||
| Voltage drop (sensor ON) (V) | < 6.5 ---> | ||
| Short circuit protection | Incorporated ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 2 x 0.50 mm^2 | ||
| Connector plug | H | K (type 11) | |
| EMBEDDABLE (FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 2 WIRES D.C. NO | SI30 - A10 NO |
SI30 - A10 NO H |
SI30 - A10 NO K |
| AMPLIFIED 2 WIRES D.C. NC | SI30 - A10 NC |
SI30 - A10 NC H |
SI30 - A10 NC K |
| Switching distance (Sn) (mm) | 10 | 10 | 10 |
| Continuous voltage (residual ripple <=10%) (V) | 20 ÷ 250 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 12 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 300 ---> | ||
| Min. output current (mA) | 5 ---> | ||
| Max. peak current for 20ms (A) | 1.5 ---> | ||
| Absorption at 24Vdc (mA) | < 1 ---> | ||
| Voltage drop (sensor ON) (V) | < 6 ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 2 x 0.50 mm^2 | ||
| Connector plug | H | K (type 11) | |
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 2 WIRES D.C. NO | SI30 - AE15 NO |
SI30 - AE15 NO H |
SI30 - AE15 NO K |
| AMPLIFIED 2 WIRES D.C. NC | SI30 - AE15 NC |
SI30 - AE15 NC H |
SI30 - AE15 NC K |
| Switching distance (Sn) (mm) | 15 | 15 | 15 |
| Continuous voltage (residual ripple <=10%) (V) | 20 ÷ 250 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 12 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 300 ---> | ||
| Min. output current (mA) | 5 ---> | ||
| Max. peak current for 20ms (A) | 1.5 ---> | ||
| Absorption at 24Vdc (mA) | < 1 ---> | ||
| Voltage drop (sensor ON) (V) | < 6 ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 2 x 0.50 mm^2 | ||
| Connector plug | H | K (type 11) | |
