AECO Sensors
Inductive Sensors M12 x 1
| EMBEDDABLE (FLUSH MOUNTING) | ||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | ||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
|
| ST | ST | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI12 - C2 NPN NO S |
SI12 - C2 NPN NO H S |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI12 - C2 NPN NC S |
SI12 - C2 NPN NC H S |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI12 - C2 PNP NO S |
SI12 - C2 PNP NO H S |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI12 - C2 PNP NC S |
SI12 - C2 PNP NC H S |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | ||
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | ||
| Switching distance (Sn) (mm) | 2 | 2 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | |
| Hysteresis (%Sn) (mm) | < 10% ---> | |
| Switching frequency (Hz) | 1000 ---> | |
| Repeatability (% of Sn) | <= 3 ---> | |
| Max output current (mA) | 200 ---> | |
| Absorption at 24Vdc (mA) | < 15 ---> | |
| Voltage drop (sensor ON) (V) | < 1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits (°C) | - 25 ÷ + 70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Nickelled brass ---> | |
| Cable PVC (2m) | 3 x 0.25 mm^2 | |
| Connector plug | H | |
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | ||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | ||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
|
| ST | ST | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI12 - CE4 NPN NO S |
SI12 - CE4 NPN NO H S |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI12 - CE4 NPN NC S |
SI12 - CE4 NPN NC H S |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI12 - CE4 PNP NO S | SI12 - CE4 PNP NO H S |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI12 - CE4 PNP NC S | SI12 - CE4 PNP NC H S |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | ||
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | ||
| Switching distance (Sn) (mm) | 4 | 4 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | |
| Hysteresis (%Sn) (mm) | < 10% ---> | |
| Switching frequency (Hz) | 1000 ---> | |
| Repeatability (% of Sn) | <= 3 ---> | |
| Max output current (mA) | 200 ---> | |
| Absorption at 24Vdc (mA) | < 15 ---> | |
| Voltage drop (sensor ON) (V) | < 1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits (°C) | - 25 ÷ + 70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Nickelled brass ---> | |
| Cable PVC (2m) | 3 x 0.25 mm^2 | |
| Connector plug | H | |
| EMBEDDABLE (FLUSH MOUNTING) | ||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | ||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
|
| EX | EX | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI12 - DC4 NPN NO S | SI12 - DC4 NPN NO H S |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI12 - DC4 NPN NC S | SI12 - DC4 NPN NC H S |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI12 - DC4 PNP NO S | SI12 - DC4 PNP NO H S |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI12 - DC4 PNP NC S | SI12 - DC4 PNP NC H S |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | SI12 - DC4 PNP NC S | SI12 - DC4 NPN NO+NC H S |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | SI12 - DC4 PNP NC S | SI12 - DC4 PNP NO+NC H S |
| Switching distance (Sn) (mm) | 4 | 4 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | |
| Hysteresis (%Sn) (mm) | < 10% ---> | |
| Switching frequency (Hz) | 1000 ---> | |
| Repeatability (% of Sn) | <= 3 ---> | |
| Max output current (mA) | 200 ---> | |
| Absorption at 24Vdc (mA) | < 15 ---> | |
| Voltage drop (sensor ON) (V) | < 1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits (°C) | - 25 ÷ + 70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Stainless steel ---> | |
| Cable PVC (2m) | 3 x 0.25 mm^2 - 4 x 0.25 mm^2 | |
| Connector plug | H | |
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | ||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | ||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
|
| EX | EX | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI12 - DCE8 NPN NO S | SI12 - DCE8 NPN NO HS |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI12 - DCE8 NPN NC S | SI12 - DCE8 NPN NC HS |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI12 - DCE8 PNP NO S | SI12 - DCE8 PNP NO HS |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI12 - DCE8 PNP NC S | SI12 - DCE8 PNP NC HS |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | ||
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | ||
| Switching distance (Sn) (mm) | 8 | 8 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | |
| Hysteresis (%Sn) (mm) | < 10% ---> | |
| Switching frequency (Hz) | 600 ---> | |
| Repeatability (% of Sn) | <= 3 ---> | |
| Max output current (mA) | 200 ---> | |
| Absorption at 24Vdc (mA) | < 15 ---> | |
| Voltage drop (sensor ON) (V) | < 1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits (°C) | - 25 ÷ + 70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Stainless steel ---> | |
| Cable PVC (2m) | 3 x 0.25 mm^2 | |
| Connector plug | H | |
| EMBEDDABLE (FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI12 - C2 NPN NO |
SI12 - C2 NPN NO H |
SI12 - C2 NPN NO K |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI12 - C2 NPN NC |
SI12 - C2 NPN NC H |
SI12 - C2 NPN NC K |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI12 - C2 PNP NO |
SI12 - C2 PNP NO H |
SI12 - C2 PNP NO K |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI12 - C2 PNP NC |
SI12 - C2 PNP NC H |
SI12 - C2 PNP NC K |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | SI12 - C2 NPN NO + NC |
SI12 - C2 NPN NO + NC H |
SI12 - C2 NPN NO + NC K |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | SI12 - C2 PNP NO + NC |
SI12 - C2 PNP NO + NC H |
SI12 - C2 PNP NO + NC K |
| Switching distance (Sn) (mm) | 2 | 2 | 2 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 1000 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 200 ---> | ||
| Absorption at 24Vdc (mA) | < 15 ---> | ||
| Voltage drop (sensor ON) (V) | < 1.8 ---> | ||
| Short circuit protection | Incorporated ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 3 x 0.25 mm^2 - 4 x 0.25 mm^2 | ||
| Connector plug | H | K (type 11) | |
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 3 WIRES D.C. NPN NO | SI12 - CE4 NPN NO |
SI12 - CE4 NPN NO H |
SI12 - CE4 NPN NO K |
| AMPLIFIED 3 WIRES D.C. NPN NC | SI12 - CE4 NPN NC |
SI12 - CE4 NPN NC H |
SI12 - CE4 NPN NC K |
| AMPLIFIED 3 WIRES D.C. PNP NO | SI12 - CE4 PNP NO | SI12 - CE4 PNP NO H | SI12 - CE4 PNP NO K |
| AMPLIFIED 3 WIRES D.C. PNP NC | SI12 - CE4 PNP NC | SI12 - CE4 PNP NC H | SI12 - CE4 PNP NC K |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE NPN NO+NC | SI12 - CE4 NPN NO + NC |
SI12 - CE4 NPN NO + NC H |
SI12 - CE4 NPN NO + NC K |
| AMPLIFIED 4 WIRES D.C. ANTIPHASE PNP NO+NC | SI12 - CE4 PNP NO + NC | SI12 - CE4 PNP NO + NC H | SI12 - CE4 PNP NO + NC K |
| Switching distance (Sn) (mm) | 4 | 4 | 4 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 30 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 1000 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 200 ---> | ||
| Absorption at 24Vdc (mA) | < 15 ---> | ||
| Voltage drop (sensor ON) (V) | < 1.8 ---> | ||
| Short circuit protection | Incorporated ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 3 x 0.25 mm^2 - 4 x 0.25 mm^2 | ||
| Connector plug | H | K (type 11) | |
| EMBEDDABLE (FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 2 WIRES D.C. NO | SI12 - B2 NO |
SI12 - B2 NO H |
SI12 - B2 NO K |
| AMPLIFIED 2 WIRES D.C. NC | SI12 - B2 NC |
SI12 - B2 NC H |
SI12 - B2 NC K |
| Switching distance (Sn) (mm) | 2 | 2 | 2 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 55 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 1000 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 100 ---> | ||
| Min. output current (mA) | 1.5 ---> | ||
| Absorption at 24Vdc (mA) | < 0.6 ---> | ||
| Voltage drop (sensor ON) (V) | < 6.5 ---> | ||
| Short circuit protection | Incorporated ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 2 x 0.25 mm^2 | ||
| Connector plug | H | K (type 11) | |
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 2 WIRES D.C. NO | SI12 - BE4 NO |
SI12 - BE4 NO H |
SI12 - BE4 NO K |
| AMPLIFIED 2 WIRES D.C. NC | SI12 - BE4 NC |
SI12 - BE4 NC H |
SI12 - BE4 NC K |
| Switching distance (Sn) (mm) | 4 | 4 | 4 |
| Continuous voltage (residual ripple <=10%) (V) | 10 ÷ 55 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 1000 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 100 ---> | ||
| Min. output current (mA) | 1.5 ---> | ||
| Absorption at 24Vdc (mA) | < 0.6 ---> | ||
| Voltage drop (sensor ON) (V) | < 6.5 ---> | ||
| Short circuit protection | Incorporated ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 2 x 0.25 mm^2 | ||
| Connector plug | H | K (type 11) | |
| EMBEDDABLE (FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm |  |
 |
|
| ST | ST | ST | |
| AMPLIFIED 2 WIRES D.C. NO | SI12 - A2 NO |
SI12 - A2 NO H |
SI12 - A2 NO K |
| AMPLIFIED 2 WIRES D.C. NC | SI12 - A2 NC |
SI12 - A2 NC H |
SI12 - A2 NC K |
| Switching distance (Sn) (mm) | 2 | 2 | 2 |
| Continuous voltage (residual ripple <=10%) (V) | 20 ÷ 250 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 12 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 300 ---> | ||
| Min. output current (mA) | 1.5 ---> | ||
| Absorption at 24Vdc (mA) | < 1 ---> | ||
| Voltage drop (sensor ON) (V) | < 6 ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 2 x 0.25 mm^2 | ||
| Connector plug | H | K (type 11) | |
| NOT EMBEDDABLE (NON FLUSH MOUNTING) | |||
| ST STANDARD SWITCHING DISTANCE - EX EXTENDED SWITCHING DISTANCE | |||
| TECHNICAL CHARACTERISTICS - Dimensions mm | |
|
|
| ST | ST | ST | |
| AMPLIFIED 2 WIRES D.C. NO | SI12 - AE4 NO |
SI12 - AE4 NO H |
SI12 - AE4 NO K |
| AMPLIFIED 2 WIRES D.C. NC | SI12 - AE4 NC |
SI12 - AE4 NC H |
SI12 - AE4 NC K |
| Switching distance (Sn) (mm) | 4 | 4 | 4 |
| Continuous voltage (residual ripple <=10%) (V) | 20 ÷ 250 ---> | ||
| Hysteresis (%Sn) (mm) | < 10% ---> | ||
| Switching frequency (Hz) | 12 ---> | ||
| Repeatability (% of Sn) | <= 3 ---> | ||
| Max output current (mA) | 300 ---> | ||
| Min. output current (mA) | 1.5 ---> | ||
| Absorption at 24Vdc (mA) | < 1 ---> | ||
| Voltage drop (sensor ON) (V) | < 6 ---> | ||
| Led | Incorporated ---> | ||
| Temperature limits (°C) | - 25 ÷ + 70 ---> | ||
| IP rating (IP) | 67 | Depending on connector | 65 |
| Housing | Nickelled brass ---> | ||
| Cable PVC (2m) | 2 x 0.25 mm^2 | ||
| Connector plug | H | K (type 11) | |
