AECO Sensors
Inductive Sensors 0 6.5mm
| EXTENDED SWITCHING DISTANCE (SENSING SURFACE GREY COLOR), EMBEDDABLE (FLUSH MOUNTING) | ||
| Dimensions mm - TECHNICAL CHARACTERISTICS |  |
|
| Amplified 3 Wires DC NPN NO | SI6.5 - DC 2 NPN NO S |
SI6.5 - DC 2 NPN NO H1 S |
| Amplified 3 Wires DC NPN NC | SI6.5 - DC 2 NPN NC S |
SI6.5 - DC 2 NPN NC H1 S |
| Amplified 3 Wires DC PNP NO | SI6.5 - DC 2 PNP NO S |
SI6.5 - DC 2 PNP NO H1 S |
| Amplified 3 Wires DC PNP NC | SI6.5 - DC 2 PNP NC S |
SI6.5 - DC 2 PNP NC H1 S |
| Switching distance (Sn) mm | 2 | 2 |
| Continuous voltage (residual ripple <=10%) V | 6 / 30 ---> | |
| Hysteresis (%Sn) mm | <10% ---> | |
| Switching frequency Hz | 2000 ---> | |
| Repeatability % of Sn | <=3 ---> | |
| Max Output Current mA | 200 ---> | |
| Absorption at 24Vdc mA | <12 ---> | |
| Voltage drop (sensor ON) V | <1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits °C | -25 / +70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Stainless Steel ---> | |
| Cable SALGUM (2m) | 3 x 0.14 mm2 | - |
| Connector plug | - | H1 |
 | ||
| EXTENDED SWITCHING DISTANCE (SENSING SURFACE GREY COLOR), NOT EMBEDDABLE (NON-FLUSH MOUNTING) | ||
| Dimensions mm - TECHNICAL CHARACTERISTICS |  |
|
| Amplified 3 Wires DC NPN NO | SI6.5 - DCE3 NPN NO S |
SI6.5 - DCE3 NPN NO H1 S |
| Amplified 3 Wires DC NPN NC | SI6.5 - DCE3 NPN NC S |
SI6.5 - DCE3 NPN NC H1 S |
| Amplified 3 Wires DC PNP NO | SI6.5 - DCE3 PNP NO S |
SI6.5 - DCE3 PNP NO H1 S |
| Amplified 3 Wires DC PNP NC | SI6.5 - DCE3 PNP NC S |
SI6.5 - DCE3 PNP NC H1 S |
| Switching distance (Sn) mm | 3 | 3 |
| Continuous voltage (residual ripple <=10%) V | 6 / 30 ---> | |
| Hysteresis (%Sn) mm | <10% ---> | |
| Switching frequency Hz | 2000 ---> | |
| Repeatability % of Sn | <=3 ---> | |
| Max Output Current mA | 200 ---> | |
| Absorption at 24Vdc mA | <12 ---> | |
| Voltage drop (sensor ON) V | <1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits °C | -25 / +70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Stainless Steel ---> | |
| Cable SALGUM (2m) | 3 x 0.14 mm2 | - |
| Connector plug | - | H1 |
| EXTENDED SWITCHING DISTANCE (SENSING SURFACE GREY COLOR), EMBEDDABLE (FLUSH MOUNTING) | ||
| Dimensions mm - TECHNICAL CHARACTERISTICS |  |
|
| Amplified 3 Wires DC NPN NO | SI6.5 - DC2 NPN NO |
SI6.5 - DC2 NPN NO H1 |
| Amplified 3 Wires DC NPN NC | SI6.5 - DC2 NPN NC |
SI6.5 - DC2 NPN NC H1 |
| Amplified 3 Wires DC PNP NO | SI6.5 - DC2 PNP NO |
SI6.5 - DC2 PNP NO H1 |
| Amplified 3 Wires DC PNP NC | SI6.5 - DC2 PNP NC |
SI6.5 - DC2 PNP NC H1 |
| Switching distance (Sn) mm | 2 | 2 |
| Continuous voltage (residual ripple <=10%) V | 6 / 30 ---> | |
| Hysteresis (%Sn) mm | <10% ---> | |
| Switching frequency Hz | 2000 ---> | |
| Repeatability % of Sn | <=3 ---> | |
| Max Output Current mA | 200 ---> | |
| Absorption at 24Vdc mA | <12 ---> | |
| Voltage drop (sensor ON) V | <1.8 ---> | |
| Short circuit protection | Incorporated ---> | |
| Led | Incorporated ---> | |
| Temperature limits °C | -25 / +70 ---> | |
| IP rating (IP) | 67 | Depending on connector |
| Housing | Stainless Steel ---> | |
| Cable SALGUM (2m) | 3 x 0.14 mm2 | - |
| Connector plug | - | H1 |
